Hero HoodSkulls® are our way of giving something back to the badasses who put their lives on the line to protect our families and freedoms. 

HoodSkulls® let you personalize your rig beyond decals and expensive mods. HoodSkulls® can be bolted onto nearly anything with a hole; bumpers, light bars, CB antenna mounts and cowls. Free badass decal included.

IMPACT:

Your support permits us to make contributions to incredible causes. Our favorite causes* are currently:

• Jon's Mission for 22. 

•  for an interview of the parents who founded .
• Mission 22. 

• Too many American veterans return to civilian life in need of healing.  is an incredible resource for information, assistance and programs for our veterans. 
• Wounded Warrior Project. Click on the  below to read more about the Wounded Warrior Project.

PLUGGED: Some designs in our Hero HoodSkulls® family are wire channeled for your pre-wired, 12v 5mm, LED bulbs. The eye sockets on our Hero22® are 'plugged' (see ), but the 1.5mm thin, visible ‘plug’ can be easily drilled (5/32 bit) through it’s center, giving you access to concealed internal channels for your wires. They are LED-Ready when you are. Click to watch a how-to video on plug removal. 

MATERIALS WE USE: We use stainless steel bolting hardware and automotive grade rubber gaskets. We prefer and continue our full migration to ASA (acrylic styrene acrylonitrile, widely used in the automotive industry).

PAINTING: We manufacture in materials that can be easily painted. Painting is not necessary but would add your personal touch and give even more durability to your HoodSkulls®. Mud baths and snow also provide protection, so be sure to apply mud or snow liberally when available! 

BOLTING ON HOODSKULLS®:

• IMPORTANT! We ship with a nearly universal fitment kit. However, if you are installing your HoodSkulls® on the cowl of a new (2018 ) Jeep, you need our . You do not need the fitment kit on any other vehicle, whether from Toyota, Honda , Mercedes, Ford, Chevrolet, Ram, Nissan, General Motors, Isuzu, Mitsubishi, Land Rover, Subaru, Hummer, etc. (but you will need a hole to bolt through).
• HoodSkulls® ship with stainless steel (silver) bolts, and each ships with rubber gaskets to protect the surrounding paint and seal gaps. Stainless steel washers and locknuts are included. 
• Removal of the boring, OEM Jeep hood bump is simple. The bolting of our HoodSkulls® is just as easy. Our design team listened to hard core Jeepers, so if you ever lower your windshield to fly like an old school pilot, your HoodSkulls® can rest in your glove box along with the removed windshield bolts. ☠️🔥👊🏻😎 
• Don't rest your heavy windshield on your HoodSkulls® without padding and glass insurance. Our latest versions of HoodSkulls® incorporate a revised, bolt-through installation process that is simultaneously compatible with old and new Jeeps.
• Please note that a 5mm hex key and 10mm deep socket will be required for installation. Only the hex key is required for installation on a cowl. 
• If you take your HoodSkulls® through a carwash with heavy mats beating on them, you may damage small details like horns or tiara. Please select a model that best matches your lifestyle, there’s one for everyone! Evaluate for yourself whether and where to install them on your Jeep, or decide to ultimately keep them on your desk.
• Lost your packing slip? .
• If you need a universal hood bracket, the team at our companion web store has links. . Let us know when you place your order that you will be using a universal hood bracket so we can send the correct length bolts.

💀🌶💀🌶💀🌶💀🌶💀🌶💀🌶

LED-READY: LED-Ready HoodSkulls® do not include LED bulbs or wires. Adding LED's is a DIY mod project that requires semi-advanced skills. 'LED-Ready' does not mean 'plug-and-play'. If you need installation instructions beyond what we posted on our  page, you should not get the LED-Ready version of HoodSkulls®. We don't provide tech support for LED bulbs or their installation. LED-Ready have built in channels for your wiring, with a clean exit for those wires. Just add your wires and LED 'eyes' (pre-wired 12V, 5mm LED) then connect to relays under your hood and a switch in your cabin. No drilling is required with our LED-Ready HoodSkulls®. There are so many options with LED colors and switches, our DIY fans are having a party with all of the choices. . Remember to seal gaps around your installed bulbs, and consult your DOT laws about vehicle lighting. Also remember to verify the polarity of your prewired bulbs (black and red are sometimes reversed). Please note that before you install your bulbs, there will be holes in the eye sockets. Please visit our  page and refer to the wiring pictorial links. The installation is generally simple, but diagnosing and repairing a short circuit in your Jeep can be expensive and complicated. Hire a mechanic or electrician. 

INTERNATIONAL ORDERS, CUSTOMS AND IMPORT TAXES: Customers are responsible for any customs and import taxes that may apply. We are not responsible for delays due to customs, but the wait will be worth it. HoodSkulls® will make your rig grin.

ADDITIONAL SOURCES OF INFORMATION: Please visit the  section for warranty, material, general information and a smile.

We love our fans:

Please read our Terms of Service and Legal Disclaimer. We are not affiliated, associated, authorized, endorsed by, or in any way officially connected with any other company. All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them.

* The 501(c)(3) charities that we support are (formerly Elderheart),  and .